Homepage > Technologies > Environment > Particulate Filter

Particulate Filter

 

Particulate Filter

Filtre à particulesZoom

Particulate Filter

The particulate filter traps and burns the particles produced by the engine. With the direct-injection common rail technology, the level of particle emissions from the HDi engine was already particularly low. With the PF, it drops still further to a level that is barely measurable. In this way, the engine goes well beyond the future environmental standards of the European Union.


The PF traps the particles on a filter and burns them at regular intervals.


The particles burn naturally at around 550 °C, but the initial temperature of the exhaust gases The PF modifies these two parameters through:

  • a post-injection of fuel in the expansion phase, which generates post-combustion in the cylinder and raises the temperature of the gases by 200 °C to 250 °C, to around 350°C to 400 °C.
  • additional post-combustion generated by an oxidation catalyser placed upstream of the filter, which treats the unburned hydrocarbons from the post-injection phase. The temperature may increase by a further 100 °C, up to 450°C or 500 °C.
  • the fuel additive Eolys fuel additive. This additive lowers the natural particle combustion temperature to 450 °C.



This technology gives the HDi diesel engine a real ecological advantage by combining its intrinsic performance with the ability to eliminate particles and fumes.



* The models and/or versions featured on this site as well as their equipment, options and accessories may vary from one country to another or not be available locally.